Autoclaved Aerated Concrete Lintels
Autoclaved Aerated Concrete Lintels, transfers the additional load on the structure to other building components. Nowadays, all kinds of door sills are made in different materials such as brick, concrete, wood, steel and concrete. Each type of door shoe model has unique features and specifications. Therefore, people active in the construction industry should get enough information about their advantages and disadvantages.
Today, to maintain openings and openings, you must use a suitable and high-quality door sill. The employer should order the appropriate door insoles according to the type of structure and the quality of the materials he has. Usually, this building structure is installed when the distance between the wall and the ground is high or when the wall continues to a very high height.
Doors and windows in the building are always considered a little more sensitive than other parts of the building due to the presence of empty space. Therefore, it is necessary to reduce the weakness of these points in the building with the help of door sills. A lot of materials and components are used to build construction structures, and today, the gate shoe plays a role as one of the important construction components in the implementation of construction projects.
Lintels
. Very light and autoclaved concretes are used to make these lintels. Meanwhile, round bars are also used to improve this structure. Choosing the length and width of the lintels should be determined according to a series of specific rules. For example, the width of the lintel should be equal to the thickness of the wall. In addition, its length should also be equal to the size of the openings.
Nowadays, there is no need to strengthen the place of the doorway with the help of other lintels; Because usually, the material of the door sill is chosen to be the same as the material of the walls of the structure. The heat transfer coefficient of the lintels at the door location does not change. For this reason, today, it is easy to install door sills in specified places.
The customer can order the dimensions and sizes of the roofs according to their needs and minimize the construction cost with the help of ready roofs. In addition, with the help of ready-made concrete, the construction speed will increase significantly. The elements of this structure are used as part of the autoclaved aerated concrete system and are used with the help of blocks to make windows, doors, openings, etc.
Sartaqs are made of AAC and are usually designed and produced in reinforced form. Unlike many iron profiles, this structure does not have the problems of material heterogeneity. At the same time, it also prevents the creation of a thermal bridge and provides a completely uniform surface for plating.
Sartaq has much more quality and capabilities than other models in the market. Therefore, the employer will increase the value of his building structure by providing this product. In addition, it will also guarantee the safety of the building in this way. Some models of door sills available in the market rust and get damaged after a while, so the employer should be more careful when preparing the door sills.
Arch head for non-load bearing walls
Today, for any non-load-bearing wall, it is possible to use the capabilities of the gate shoe (sartaq). Very important points should be considered when using these headgears. For example, the walls must have the same thickness as the wall, or technical units should be contacted to determine the exact dimensions of the walls.
A lot of force is always applied to the door and window area, so to increase the tolerance of the structure in front of these forces, a bracket must be used. Today, metal and concrete door sills are sold more than other models of this structure in the market. When installing each of these types of door sills, special attention should be paid to a series of tips and explanations.
